BMW 3 Series E46

since 1998 release

Repair and operation of the car



BMW 3 Series E46
+ BMW 3 cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering with the hydraulic booster (servoupravleniye)
      Removal and installation of the block of a safety cushion on a steering wheel
      Removal and installation of a steering wheel
      Removal and installation of a tip of steering draft
      Removal and installation of steering draft
      Removal and installation of the pump of the hydraulic booster
      Filling with liquid and removal of air from a power steering hydraulic system
      Angles of installation of forward wheels. Check of installation of wheels
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Removal and installation of a steering wheel

 REMOVAL

1 Remove the safety cushion block, address appropriate section.

Before removal of the block of a safety cushion surely study instructions on security measures.

2 Turn a steering wheel and establish directly forward wheels. The spoke of a steering wheel has to stand horizontally.
3 Weaken the fastening screw a head on 16 mm, holding at the same time a steering wheel from rotation.
4 Turn out the screw and remove a steering wheel.


 INSTALLATION

5 Check whether there are forward wheels directly.

6 Put a steering wheel so that markings on a steering wheel-1-and a steering column-2-coincided.

7 Fix a steering wheel, having wrapped the fastening screw the moment of 63 N • m.
8 Install into place the safety cushion block, address appropriate section.