BMW 3 Series E46

since 1998 release

Repair and operation of the car



BMW 3 Series E46
+ BMW 3 cars (E46)
+ Current leaving and service
- Engine
   - Procedures of repair of the engine
      Removal and installation of the lower cover of a motive compartment
      Removal and installation of a box of an air inlet
      Check of a compression
      Removal and installation of the inlet pipeline
      Removal and installation of a head cylinders / replacement of sealing laying
      Removal and installation of camshafts
      Removal and installation of the vacuum pump
      Removal, installation and tension of a maple belt
   + Engine lubrication system
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Removal and installation of a box of an air inlet

The box of an air inlet needs to be removed if it is required to uncover a head of cylinders or the inlet pipeline.

 REMOVAL

1 Remove an element of the air filter of ventilation of salon, a heater and the conditioner.

2 Reveal cable channel at the lower part of a vozdukhosborny box-2-and take out cables.

3 Turn out bolts-1-and remove the lower part of a vozdukhosborny box-2-.


 INSTALLATION

1 Fix by bolts the lower part of a vozdukhosborny box.
2 Enclose cables in cable channel at the lower part of a vozdukhosborny box. Fix cable channel.
3 Establish the filtering element of a heater and the conditioner, address the Section Replacement of an Element of the Filter of Air of Salon.