BMW 3 Series E46

since 1998 release

Repair and operation of the car



BMW 3 Series E46
+ BMW 3 cars (E46)
- Current leaving and service
   Introduction
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them. Designation of tires and disks of wheels
   Replacement of motive oil and oil filter
   Replacement of the filtering element of the air filter
   Checks of the brake system
   Replacement of an element of the filter of air of salon
   Check of a condition of driving ridge belts
   Check of a state and replacement of hoses of a motive compartment
   Check of functioning of the cooling system and frost resistance of cooling liquid
   Check of a condition of system of production of the fulfilled gases
   Check of level of oil in a manual box of gear shifting
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Check of level of liquid of system of hydrostrengthening of a wheel
   Visual check of a body and its bottom
   Check of seat belts
   Rotation and replacement of wheels
   Check of a state, replacement of brushes and adjustment of a corner of screen wipers
   Check of a condition of the battery, care of it and charging
   Replacement of brake fluid
   Check and replacement of spark plugs
   Check of fuel system, replacement of the fuel filter. Operation of diesel model in the conditions of winter
   Greasing of loops and locks of doors
   Replacement of the battery of a key of remote control
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Replacement of the battery of a key of remote control

At removal of the battery, check tags about existence of polarity of connection of the battery, otherwise put tags.
If the light-emitting diode at inclusion does not burn it is necessary to replace the battery.


1 Remove a casing by means of the small screw-driver.


2 Turn out two screws and uncover.
3 Insert the new battery, having oriented poles "-/+" the same as at the removed battery.
4 Fix a battery casing. Latch a cover so that the distinct click was heard.
5 If necessary initialize a new charm of remote control, address the Section Initialization of Remote Control.