BMW 3 Series E46
+ BMW 3 cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
+ Dignostic of electric elements
- Lighting and alarm system
Removal and installation/check of a sound signal
Initialization of remote control
Replacement of glow lamps of external lighting
Replacement of glow lamps of internal lighting
Removal and installation of a headlight
Removal and installation of a ring cover of a headlight
Removal and installation of the electric motor of adjustment of range of light
Adjustment of headlights
Gas-discharge lamps of passing beam (xenon lamps)
Removal and installation of a back lamp
+ Devices and equipment
+ Schemes of electric equipment
|
Lighting and alarm system
Removal and installation/check of a sound signal Behind a front bumper about one signal of high-pitch and low tone is on the left side established. For protection of contacts of a signal between the button and a signal the relay is switched on. At inclusion of a signal the chain of management of the relay becomes isolated.
|
|
|
3 Attach sound signals by means of auxiliary wires directly to onboard the rechargeable battery. At the same time connect a brown cable to the mass of the battery (-), and other cable with a positive pole of the battery (+). Signals have to work. |
|
|
|
