BMW 3 Series E46
since 1998 release
Repair and operation of the car
BMW 3 Series E46
+ BMW 3 cars (E46)
+ Current leaving and service
+ Cooling systems, heating
- Power supply systems, injection and release
Security measures and rules of respect for purity during the work with fuel system
Removal and installation of the sensor of a reserve of fuel / fuel pump
Check of the sensor of a reserve of fuel
+ Power supply system of petrol engines
- System of injection of fuel of the petrol engine
The general information and security measures at work
Principle of work of the DME system
Removal and installation of injectors
Check of system of injection of the petrol engine
Check and adjustment of turns of idling and concentration WITH
+ Power supply system of diesel engines
+ System of production of the fulfilled gases
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Onboard electric equipment
+ Schemes of electric equipment
Check of system of injection of the petrol engineFor system search of malfunctions and their elimination special devices are required. Address the Section Diagnostics of Malfunctions. Work it is desirable to carry out HUNDRED in conditions. Here only external checks are described.
1 Check tension and degree of state of charge of the rechargeable battery.
2 Check all safety locks, address the Section Replacement of Safety Locks.
3 Rasstykuyte and again join all shtekerny connections of the corresponding electronic system. Check reliability of fastening of shtekerny connections and cables in a motive compartment.
4 Check all connections of weight and reliability of contacts.
5 Check tightness of hoses and pipelines. Pay attention to existence of a time and cracks. Delay the weakened connections.