BMW 3 Series E46

since 1998 release

Repair and operation of the car



BMW 3 Series E46
+ BMW 3 cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   General information and security measures
   + Leaving and repair of damages of a body
   + External elements of a body
   - Internal elements of a body
      Removal and installation of forward peaks of the dashboard
      Removal and installation of facing forward parts of the region of legs
      Removal and installation of the left ware box
      Removal and installation of the right ware box
      Removal and installation of the central console
      Removal and installation of the central armrest
      Removal and installation of a pocket of the console of switches
      Removal and installation of the console of switches
      Removal and installation of the electric motor of the drive of the movable panel of a roof
      Removal and installation of a mirror of an interior
      Interior mirror with automatic blackout
      Removal and installation of side facing of a luggage carrier
      Removal and installation of facing of the back panel
      Removal and installation of facing of a trunk lid
      Removal and installation of a head restraint of a front seat
      Natyazhitel of a seat belt. Main data and security measures
      Removal and installation of a front seat
      Removal and installation of a back seat
      Removal and installation of nozzles of windscreen washer
      Adjustment of nozzles of windscreen washer
      Removal, installation and check of nozzles of a faroomyvatel
      Removal and installation of levers of a screen wiper
      Removal and installation of the tank/pump of a washer
+ Onboard electric equipment
+ Schemes of electric equipment





Removal and installation of the electric motor of the drive of the movable panel of a roof

 REMOVAL

1 Remove the screw-driver a peak. Rasstykuyte the drive switch socket for what open blocking by compression.

2 Turn out fastening screws a key of Torx of T25.

3 Remove the block the electric motor – a reducer and to a rasstykuyta I will corrode.


 INSTALLATION

4 Install into place the block the electric motor – a reducer and attach it. Fix it slightly by the moment of 3 NChm two short screws-2-and one long-1-. Surely install new screws. If it is impossible, grease screws previously with means for fixing of threaded connections, for example, of Loctite 270.
5 Join the drive switch socket, establish a cover.

Initialization of the movable panel


6 Install the movable panel in the provision of rise and then press the switch of the movable panel further in the Provision of Rise direction.
7 You keep the switch 5 with in the provision of rise after:

- each interruption of food or
- adjustments of a roof.

8 You keep the switch 20 with in the provision of rise after:

- malfunctions in work
- detachments of the drive or
- works with hummock drafts.

9 Initialization is considered finished if the movable panel once again is shortly pressed in the Provision of Rise direction (click).