BMW 3 Series E46

since 1998 release

Repair and operation of the car



BMW 3 Series E46
+ BMW 3 cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   + Dignostic of electric elements
   + Lighting and alarm system
   - Devices and equipment
      Monitors - the main data
      Removal and installation of the control panel
      Removal and installation of the index of the turn/switch of a screen wiper
      Removal and installation of facing of a steering column
      Removal and installation of the switch of light
      Removal and installation of switches: heating of a seat / sun-protection curtain / system Hi-Fi/antiprobuksovochna of the ASR system
      Removal and installation of switches: alarm system, uniform lock, window regulators
      Removal and installation of the radio receiver
      Removal and installation of a loudspeaker
      Removal and installation of electric motors/drafts of a screen wiper
      Check of the pump of windscreen washer
      Explanatory remarks to schemes of electric connections
+ Schemes of electric equipment





Removal and installation of the switch of light

 REMOVAL

1 Remove the left forward peak, address the Section Removal and installation of forward peaks of the dashboard.

2 Disconnect the switch-1-(arrows on an illustration).

The switch can be fixed by one or two screws. 2 – guides.

3 Wring out the switch at guides-2-up, disconnect from fiksatorny pads-3-and take out.

4 The socket-4-also remove Rasstykuyte from the switch-1-. For this purpose disconnect a collar-5-and take away it from a cable.


 INSTALLATION

5 Join the socket and fix it a collar. You watch that the collar was recorded.
6 Press the switch into an opening on the dashboard and record.
7 Fix the switch above by one or two screws.
8 Establish the left forward peak, address the Section Removal and installation of forward peaks of the dashboard.