BMW 3 Series E46

since 1998 release

Repair and operation of the car

BMW 3 Series E46
- BMW 3 cars (E46)
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tool and equipment of a workplace
   Poddomkrachivaniye and towage
   Start of the engine from the auxiliary power supply
   Checks of readiness of the car for operation
   Automobile chemicals, oils and lubricants
   Diagnostics of malfunctions
   Governing bodies and methods of operation
   Governing bodies and devices
   Gas station
   Keys, uniform lock and anticreeping system
   Security alarm system *
   Window regulators
   The hatch with a lifting and movable cover *
   Adjustment of provision of a steering wheel
   Systems of safety
   Lock of ignition and start of the engine
   Parking brake
   Manual Box of Gear Shifting (MBGS)
   Automatic Transmission (AT) *
   Lever of the switch of indexes of turn / light signal
   Screen wipers and windscreen washers
   Heater of back glass
   Tempostat (automatic equipment of maintenance of the set speed) *
   The alarm system of emergency rapprochement at the parking (PDC) *
   System of automatic stabilization of stability with the regulator of torque of the ASC+T/engine System of dynamic control of stability of DSC *
   The air pressure control system in tires (RDC) *
   Lighting and light devices
   Heater, ventilation and conditioner of air of salon
   Equipment of salon
   Running in
   Features of driving of the car
   Catalytic converter
   Anti-blocking system of brakes (ABS)
   Disk brakes
   Brake system
   Luggage compartments
   Automobile phone *
   Readjustment of headlights
   Unlocking of a cover of the filling hatch manually
   Drive of a lifting and movable cover of the hatch manually *
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment

Parking brake


Tightening of a brake

The lever is fixed independently. If the ignition key is in situation 2, then on the control panel the control lamp will burn at the same time
Otpuskany brakes

Pull the lever a little up, press the button and lower the lever down.

The parking brake is intended only for deduction of the motionless car from spontaneous start-off from the place and affects back wheels.

If as an exception it is necessary to use the parking brake during the movement, then do not tighten it with a big force. At the same time it is necessary to hold constantly pressed the button on the lever.

Strong tightening of the parking brake can lead to blocking of back wheels and a drift of the car. When tightening the parking brake stoplights do not light up.

Cars with RKPP:
at the parking on roads with a strong bias tighten the parking brake as inclusion of the first transfer or transfer of a backing under certain circumstances is insufficient to prevent spontaneous start-off of the car from the place.

Cars with AT:
transfer the AT selector lever to situation P.

In order to avoid formation of corrosion from time to time slightly tighten the lever of the parking brake at an entrance at a small speed to the traffic light if, certainly, it is allowed by a road and transport situation.