BMW 3 Series E46

since 1998 release

Repair and operation of the car



BMW 3 Series E46
+ BMW 3 cars (E46)
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply systems, injection and release
+ Engine electric equipment
+ RKPP and transmission line
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   Removal and installation of brake shoes of forward wheels
   Removal and installation of a guide of a forward brake
   Removal and installation of a brake disk of a forward wheel
   Removal and installation of brake shoes of disk brakes
   Removal and installation of a bracket of a brake of back wheels
   Removal and installation of a brake disk of a back wheel
   Measurement of thickness of a brake disk
   Brake fluid - the main data and security measures
   Removal of air from the brake system
   Replacement of the brake pipeline
   Replacement of a forward brake hose
   Check of the amplifier of a brake
   Removal and installation of blocks of the parking brake
   Adjustment of the parking brake
   Removal and installation of the lever of the parking brake
   Removal and installation of a cable of the drive of the parking brake
   Removal and installation of the switch of a stoplight
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment



Removal and installation of a cable of the drive of the parking brake

 REMOVAL

1 Remove the brake lever, address appropriate section.
2 Remove blocks of the parking brake, address appropriate section.

3 Remove the lock of blocks of a brake, for this purpose take out a finger-1-.

4 Turn off bolts-3-and remove a brake cable support.
5 Disconnect a cable and extend it from a protective tube.


 INSTALLATION

1 Lay a cable to the lever of a brake and to a back brake.

Inserting a cable into a protective tube, you watch that the support of a cable adjoined to a protective tube.

2 Connect a cable to a plastic clip.

3 Insert a cable support into a cable and fix at a brake board by two bolts-2-.

4 Collect the parking brake, address the Section Removal and installation of blocks of the parking brake.
5 Install the brake lever, address appropriate section.
6 Adjust a brake, address appropriate section.